How Professionals Install Apitong Trailer Decking?

Decking a trailer helps in prolonging its life as it gives more strength and durability. Having it done professionally will give you the assurance that all necessary steps are being taken as professionals will follow the exact process required to deck a trailer properly.

Here are the steps how professionals install a decking on a trailer:

  1. Measure the length, width and middle of the trailer.
  1. Cut the first piece of the lumber for fitting. If the side being cut has a raised wheel well, measure the other side of the wheel well and cut another lumber piece to fit. Sand the wood ends to remove sharp edges and to protect your hand from getting splinters while loading and unloading the trailer.
  1. Drill two holes on either ends of the lumber using a ½-inch paddle bit. For avoiding the slipping of the wood, drill 1 inch from the ends. Mark and measure the center supports on the trailer and then mark it on the wood. Drill 2 holes in the lumber for matching the location of these center supports.
  1. Put the first board at the corner of the trailer. Now use a ½-inch metal drill bit instead of the paddle bit. Use the holes in the lumber and drill through the metal in the trailer frame.
  1. Place the carriage bolts in the holes and tighten the nuts.
  1. Follow the same process for installing the boards along the width of the trailer. Leave about ¼-inch gap between the boards as drainage and expansion gaps. Cut all the pieces of lumber to fit, and then drill the pilot holes to attach the wood on the trailer using carriage bolts.

Follow these steps to achieve a good trailer deck.

Blog Source URL:


Top 5 Tips To Grow Your Brazilian Teak Wood (Cumaru) Decking Business

As a Brazilian teak wood deck builder, the primary goal is not just for your business to get by, but make true success when creating beautiful and elegant outdoor spaces for your clients. A lot of decking builders tend to achieve a certain level of success and then they start to get so wrapped up with customer projects that they stop thinking about the business end. As a result, after completing the projects in hand, they do not have any other projects and have to wait for some time till they get another client.

For a successful teak wood (cumaru) decking business, you don’t have to just be a skilled builder but also a pro as a business owner. So here are five tips to follow in order to grow your business:

  • Device a Digital Marketing Strategy: Everybody nowadays has gone digital. Therefore, apart from solid marketing, you should also device some digital marketing strategy in order to compete in the digital consumer world.
  • Stay updated with the changes: Just as any other industry, the world of teak wood deck building is changing constantly. In order to go ahead and compete efficiently, you need to be updated with these changes regularly.
  • Improve your hiring process: In order to grow your business more, you should learn to make strategic decisions so that you become the prior choice for a potential customer to hire you.
  • Get your business digitally organized: Even if you have a small deck building company you should move your business to the digital world.
  • Set and measure business goals: Set “smart goals” i.e., small goals for every step of a project. Achieving a certain goal in a given time will help your team to work more efficiently.

Follow these guidelines to make sure business keeps coming in.

Blog Source URL:

Few Important Facts About Brazilian Oak Wood

Brazilian oak wood, although available in fewer amounts in America, has become quite a popular replacement for the traditional red oak wood as a decking option. The fact that these two-wood species are strikingly similar in their color ranges works for the benefit of the public, simply because Brazilian oak proves to be more economical than red oak.

The Brazilian oak is a hardwood species which is highly suitable for use as an exterior deck. The reason is that of its displayed resistance to denting. On the Janka hardness scale, this wood ranks somewhere in the middle, at a rating of 1650. It is a good hardwood which is very stable and can be conveniently installed and forgotten on your deck.

A Brazilian oak wood decking can support normal footfall, thus can be called suitable for residential applications. Your deck will exude a gorgeousness in blondish reddish hues when you invite people over for a barbeque or a Sunday roast. The best part is that this hardwood puts up a fair fight against stains, leaving nothing for you to worry about during your feasts.

The unfinished surface of this wood has medium luster. The grains are straight, which makes it have an attractive look. If you are a fan of warm colored woods, Brazilian oak is certainly a good choice for you.

Since it is not very high up on the Janka hardness scale, it may not be suited for commercial applications. However, whether indoors or outdoors on residential properties, Brazilian oak is bound to bring an eye-catching allure to your floors and decks.

Blog Source URL:

Top 3 Ways of Laying Brazilian Hardwood Decking

Brazilian hardwoods are perhaps the most popular species of exotic hardwood that are highly sought after for decking and flooring. People just love the durability and the color range that these woods give them, making them rank among the top favorite woods of the nation. There are many Brazilian hardwoods available in the market, each one as good as the other:

  • Brazilian Cherry (Jatoba)
  • Brazilian Oak (Tauari)
  • Brazilian Teak (Cumaru)
  • Brazilian Walnut (Ipe)

Mostly, people make up their minds on the kind of wood they want on their decks, but completely forget to decide a layout for it. Designing your deck is every bit as important as choosing the right wood – in this blog post, you will get to know about the top three ways of laying Brazilian hardwood decking.

Way 1: Geometry

Geometrical patterns have taken over decking designs like a tidal wave. Zig-zagging short planks running the entire length of the deck are highly popular. There can be many rows of zigzags or just one. Concentric squares are also highly popular – with contrasting wood colors.

Way 2: Brushed strokes

Art lovers find geometrical patterns too constricting for their tastes. These people choose the beautifully delicate look of laying their planks in straight rows, with contrasting colors next to each other, which makes it look like an artist’s brush stroke.

Way 3: Playing with colors

Some people want a warm or a dark color palette on their decks. They combine various species of wood for their colors and lay straight, long planks along the breadth or the length of their decks. This is the classiest type of design for a deck. It exudes a natural richness that is otherwise difficult to achieve.

Plan the design of your deck wisely!

Blog Source URL:

Everything You Need to Know About IPE Hardwood Decking

IPE is one of the most popular woods used for flooring and decking, mostly in residential projects. It is naturally hard, contains less moisture and is durable without maintenance, which is why people love it. Rain or shine; your deck will always look beautiful with IPE. The color it sports is a beautiful dark brown, which is probably the best and the most natural wood colors to have on a deck. Here is everything you need to know about IPE hardwood decking, in a nutshell.

Lasts long –

The first thing you need to know about IPE hardwood decking is that it is made to last long. It is one of the densest species of wood on earth and displays some important characteristics like resistance to fire, mildew, termites and insect infestations. As if this was not enough, this wood is known to show lesser expansion and contraction as compared to other woods. The surface is mildly rough, which is highly suitable for outdoor use.

Easy to maintain –

With wooden decking, what people worry about is its maintenance. With IPE, there is hardly anything the owner needs to do post installation. It is like one of those turnkey projects – just install and operate. The low maintenance property of IPE can be attributed to its density, which leaves little room for invasions. All the owner needs to do is clean the surface annually with hydrogen peroxide to clean the surface of deposits and grime.

Made strong –

IPE wood is naturally strong. It granular structure and mechanical properties make it a highly stable wood to use as decking. Go ahead – place all your patios on the deck, have a party. It has an excellent load rating and will not warp, crack or split.

IPE is a flexible and versatile decking option which will leave with nothing to complain about.

Blog Source URL:

Knowing About the Special Features of Brazilian Walnut Decking

If there is a popularity rating among woods used for residential decking projects, then Brazilian walnut beats all other kinds of wood. It has so many desirable properties in one package that it is hard to ignore it as potential decking option. Also known as Ipe, this wood is an exotic species, and is known to last the owner at least 20 years without adding any preservatives. Some dealers derive Brazilian walnut from responsibly reared forests, making them environmentally aware. Let’s explore more about this wonder-wood.

General properties –

Brazilian walnut is a dark colored wood. You will notice when you saw it; there is a greenish dust. Long logs can be extracted from this tree as it grows almost 150 feet tall. This wood is extremely popular as exterior decking in residential properties. Commercial establishments have also been known to use it as poolside decking. It is a highly durable species of wood, equally hard and stable. The fact that it is naturally resistant to rot, mold and mildew make the best kind of wood for outdoor use – the factor that adds the popularity factor to it. This wood is best when air dried. Warping and cracking are minimal.

Technical properties –

Brazilian walnut is one of the most desirable and versatile kinds of wood available on the market today. Below is a list of technical properties of Brazilian walnut for a better understanding of this wood.

  • Janka rating – 3840 pounds
  • Stiffness – 3140 1000 PSI
  • Strength – 25400 PSI
  • Density – 1025 kg/m3
  • Tangential shrinkage – 8%
  • Radial shrinkage – 6.6%

Brazilian walnut decking is a highly efficient option for outdoor decking. If you are considering decking, think Brazilian Walnut.

Blog Source URL:


Modern Brazilian Teak Decking Ideas

Brazilian Teak also known as Cumaru belongs to the species of Dipteryx Odorata. Considered as one of the world’s premier exotic flooring options, Brazilian teak has the most vivid colors. Golden brown mahogany red and similar hues of the Brazilian teak offers homeowners with a durable and attractive decking option. Here is what you need to know about Brazilian Teak wood

Harder than other varieties of teak.

Brazilian Teak decking is three times harder and durable than Burmese Teak which is more expensive. Brazilian Teak decking offers an ultra-low maintenance decking option that makes it a lot more appealing while remaining durable. Teak wood on decking needs to be hard to handle the vagaries of nature it is exposed to constantly. Decking wood should handle heavy footfalls and furniture without compromising on aesthetic appearance. With a rating on the janka hardness scale of 3540, it qualifies as one among the hardest decking wood.

Stunning colors to increase appeal

The medium tan to reddish brown shades of Brazilian Teak make it a wonderful design platform permitting designers and decking installation specialists to work on designs to make them look a lot appealing and attractive. The colors make the wood suitable for furniture also, which goes to prove the suitability of the wood for enhancing the visual appeal of the wood. In combination with other shades, it is possible to create a fabulous design wherever it is used.

Innovative designs for decking

Brazilian teak offers options for innovative designs. For instance, the dark shades of boards can be used to form a neat border encompassing lighter shade wood. Or a center pattern can enhance appeal greater. This could be in the form of sharp and clear shapes of squares or quadrilaterals to occupy the centre stage of the decking.

With innovative designs it is possible to exploit the appeal of Brazilian deck and create wonderful patterns which steal the limelight from other aesthetics in the residence. Combined with its ultra durability and hardness, Brazilian teak offers greater value for money when used as decking material in residences.

Blog Source URL:

Few Unique Ways of Decking a Trailer

Decking on trailer is a lot different from traditional decking requirements. Trailer decking wood requires to be affordable and durable to better suit the requirements. While most of the hardwood may actually be suitable for use as trailer decking material, some varieties are a lot more suitable than others. Apitong truck decking is considered as most suitable for trailer truck bed decking. Here is a good look at Apitong wood and its suitability as trailer decking.

Extremely durable heartwood

The Malaysian variety of Apitong is considered to be the best globally when it comes to trailer decking material. The heart wood is durable, resistant to fungi and termites. With a very high density, and its quality of being strongly resistant to moisture makes it a wonderful choice for trailer decking material.

Janka hardness scale

This south east Asian variety of hardwood scores a high 1390 on the janka hardness scale making it ideal for trailer decking.  Trailer decking is a lot different from conventional home decking because of the need to have planks that support people and objects during transit. Trailers are also expected to be parked in rugged terrain with thick undergrowth, which may cause moisture and WDOs to attack the wood. Apitong wood is most suited for trailers because of its ability to fight moisture and WDOs.

Lesser shrinkage

Trailer decking will turn disastrous if the wood shrinks over time. Apitong Keruing is known to remain dimensionally stable and not shrink. This makes it safe to use on trailers. With better dimensional stability it is possible to design the right size of boards and outfit the trailers without any problems. This is the primary reason why Apitong wood preferred by truckers for heavy duty truck beds are ideal material to protect trailers.

Blog Source URL:

What Do You Mean by Brazilian Walnut Decking?

Brazilian walnut is primarily grown in Brazil, but it is also harvested in tropical regions like Peru, Bolivia, Guatemala, and Venezuela. These trees usually grow in rainforests, it can reach almost to the heights of 160 feet and diameters of six feet. Brazilian walnut is also called IPE, a Brazilian term. Here is what you need to know about Brazilian Walnut Decking. 

Brazilian Walnut Decking- “Premier wood decking”

A natural wood deck material which is preferred by industry and design professionals across the world. An extremely dense, tight grained wood with many benefits such as natural mold and decay resistance to superior strength.  Highest rating for termite and decay resistance.  The hardness of this wood is often compared to a baseball bat, just that the Ipe is three times harder than the bat with a Janka rating of 3680lb.

The uses of Brazilian Walnut Decking

Brazilian walnut can certainly be used as indoor flooring, but it is best for outdoor decks. In fact, it is also used as foot bridges, boardwalks, boat docks, railroad crossties, piers, dock, deck, table, and pergola. This marvel of nature can be used in many ways. Brazilian walnut decking consistently outshines any other decking material in the market.

The Advantages of Brazilian Walnut Decking

The wood comes in a deep rich brown colour with some parts displaying red and amber hues. When the rays of the sun hit a new Ipe deck it gives a reddish or greenish tint in some boards. There are no chemicals required to achieve these effects, the wood itself has this natural quality.

It is valued for its durability, beauty, and even its medicinal uses. The durability – As mentioned before, Brazilian walnut has a Janka rating of 3,680 this makes it one of the hardest and most hardwearing flooring and decking options in the market today.  Additionally, no WDOs like fungus or pine beetles can get into the wood as it is hard it is naturally scratch resistant.  It reduces the level of pesticides and harmful chemicals released into the environment. The Brazilian walnut is highly resistant to fire as well, further making it popular as a decking choice.

Blog Source URL:

Precautions To Take When Cleaning & Polishing Cumaru Decking

Creating an outdoor deck that is intended to last while holding its beauty calls for the right materials. Cumaru is fast becoming that choice for many American builders. Adored for its beauty, durability, and environmental benefits, this alternative to Ipe is typically much less costly because it grows at a faster rate than other popular Brazilian hardwoods without losing the performance properties that make it a solid choice for outdoor use.

While Cumaru can be counted on to perform for 25 years or more once installed, even without preservatives, there are basic maintenance steps that should be considered. To ensure Cumaru decking maintains its beauty, be sure to do these things once it is fully installed:

  • Keep it debris free – Cumaru, like other Brazilian hardwoods, is highly resistant to rot, decay, and insect infestation even after being cut down and formed into decking. Even so, keeping the surface free of debris can help maintain its natural beauty and help prevent any staining. Regular sweeping of the surface with a standard broom or push broom is all that is required.
  • Clean it occasionally – A mild soap-and-water solution can be used to occasionally clean the decking surface. Be sure to avoid harsh chemicals and overly abrasive pads or scrubbers.
  • Do not use pressure washersCumaru decking is highly durable, but it can be damaged by the sandblasting effects of a pressure washer. Instead of using such a heavy force to clean the decking, a standard hose with a spray attachment will suffice. Pressure washer strength can cause damage on the fiber level.
  • Consider a UV blocking finish – Cumaru decking does not need preservatives to maintain its durability, but the right finish can assist with maintenance of color. A UV blocking finish can help maintain the wood’s natural color. If left unfinished, Cumaru will gradually turn a silver gray color with age.

Cumaru decking is designed to last for decades without losing its effectiveness. To maintain its natural beauty, put a standard maintenance routine in place. Basic sweeping and cleaning are all that is required to ensure lasting durability. To preserve the wood’s rich color, a UV blocking finish will prevent graying as the years pass. Once installed, this distinct alternative to Ipe will provide years of reliable use while holding onto its beauty.

Blog Source URL: